Hi all you lovely people

I have a alpha AL-10MR-D and I want it to control som light in my house. Can anyone help me with the program. (I have the winsoftware and cabel also)

The function is :

When I get a input signal (impulse) I want to have a output signal for a period of time 1-30 sec.The time must be ajustable by the + and - buttons om the alpha. On power up the time is set to 15 sec.

Can anyone help me with this little program ? What functions shall I use ?

Flembu 

Hi FlemBU

If you use the One Shot timer function in conjuction with a continuous on signal to give you your inital on signal and set it to 15sec @ power up, the output will come on for 15 sec and then turn off. Using another One Shot timer connect the imput pulse to the input of the one shot timer and using an OR logic Block connect both one shot timers to the output.Both these timers are controlable via the key pad on the front off the Alpha controler therefore you can ajust there values.If you require interlocks bettween these two timers please contact me directly and i will email you the circuit

Regards

Incubus 

If you require further assistance please contact me via email